WHISTLE TRANSMITTER WITH REMOTE SYSTEM – WTS 10250-R

Railway is the main commuting Media in India. Lakhs of passengers travel from one corner to other corner throughout India by Railway

PRESENT SYSTEM:-

There are Signaling Procedure between Motorman & Guard of the train i.e. The Guard of the train blows the whistle to indicate that the train is about to leave the platform. They speak on “Walkie Talkie” and then the Guard & Motorman show the GREEN Flag / Torch – to each other.

Our stations are very crowded & noisy, hence the whistle is heard only up to last 2 to 3 bogies of the train, means the whistle is unheard by most of the passengers and they keep on boarding or alighting the train up to the last Second which can be a major cause for an accident.

All this menace can be avoided if the Whistle warning is heard by all the passengers Boarding or Alighting the train.

PROPOSED SYSTEM:-

We have developed a Unique Device called “Whistle Transmitter with Remote System”

The “Whistle Transmitter with Remote System” will be installed on the platform near the Guard’s cabin. The Guard will press the switch on the REMOTE, which will Automatically Transmit Amplified Whistle twice from Speakers on platform. This will give

warning to the passengers that the train is about to leave the platform thus they will get sufficient time to board / alight the train and the accident can be avoided.

FACILITY :-

REMOTE Transmitter has been provided for easy operation by the Guard. The Guard can operate from his cabin through this Remote Transmitter the “Whistle Transmitter with Remote System” installed on the Station. The same Remote Transmitter can be used on any Station in the Division having ACES Make “Whistle Transmitter with Remote System” installed.

TECHNICAL FEATURES:-

After pressing Switch on REMOTE, the Amplified, Programmed Whistle will blow automatically twice within 10 seconds.

Whistle Transmitter with Remote System – WTS 10250-R

Spec. No. – AE010315

• Whistle Transmitter System

1. Working on 220 V AC.
2. Timer – Approximate 10 Sec for transmission.
3. In built L. M;
4. In built amplifier.
5. Omnibus connectivity with Speakers of existing P. A. System or New Horns.
6. Indications – LED – Power ON, Timer ON.
7. Switches – System ON / OFF.
8. Connector – 2 Pin connector for connecting Speakers or Horns – 100V.

9. System should incorporate with Amplifier, Whistling Circuit and timer Circuit.

10. Housed in metal box.

11. Will operate with all “REMOTES” of ACES Make.

• REMOTE

1. Working on Batteries.

2. Easy to handle and carry.
3. Switch for Transmition – starting whistle.
4. Indications – LED – TX, Battery Low.
5. Paired with all “Whistle Transmitter with REMOTE System – WTS 10250-R” of ACES make.

All Technical & Mechanical specifications are subject to change, without prior notice, for better performance & up gradation.

End.